Panasonic DMR-EZ48V Operating Instructions Manual

Also see for Diga DMR-EZ48V: Operating instructions Help guide Operating instructions Quick setup guide Operating instructions

Contents

54RQT9127Using on-screen menus/Status message§Only when you have set “Progressive” to “On” in the Setup menu(➡ 62).During playback or recordingPress [STATUS ].The display changes each time you press the button.Picture menu—Change the picture qualityPlayback NRReduces noise and picture degradation.Progressive§ (➡ 81)Select “On” to enable progressive output.Select “Off” if the picture is stretched horizontally.Transfer§ [When “Progressive” (➡ above) is set to “On”.]Select the method of conversion for progressive output to suitthe type of title being played (➡ 81, Film and video).When the output signal is PAL(When the tray is opened, the setting will return to “Auto”.)≥Auto:≥Video:≥Film:Automatically detects the film and videocontent, and appropriately converts it.Select when using “Auto”, and the content isdistorted.Select this if the edges ofthe film content appearjagged or rough when“Auto” is selected.However, if the videocontent is distorted asshown in the illustrationto the right, then select “Auto”.When the output signal is NTSC≥Auto1(normal):≥Auto2:≥Video:Automatically detects the film and videocontent, and appropriately converts it.In addition to “Auto1”, automatically detectsfilm contents with different frame rates andappropriately converts it.Select when using “Auto1” and “Auto2”, andthe content is distorted.Copy NR (Only when AV1, AV2 or DV is selected)Reduces video tape noise while copying.≥Automatic: Noise reduction only works on picture inputfrom a video tape.≥On: Noise reduction works for input video.≥Off: Noise reduction is off. You can record the inputsignal as it is.Sound menu—Change the sound effectDVB Multi Audio[Digital channel only]If more than one audio channel is output, you can set thedesired channel before recording.≥DVB Multi Audio cannot be selected during playback orrecording.≥Depending on the broadcast, the items that can be selectedwill differ.≥English ≥German ≥Italian ≥French≥Spanish ≥Original§§ “Original” is displayed when a broadcast is only available inthe original language.V.S.S.[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-V] [-RW‹VR›](Dolby Digital, MPEG, 2-channel or over only)Enjoy a surround-like effect if you are using two front speakersonly.≥Turn V.S.S. off if it causes distortion. (Check the surroundfunction on the connected equipment.)≥V.S.S. does not work for bilingual recordings.Dialog Enhancer[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-V] [-RW‹VR›] andDivX(Dolby Digital, 3-channel or over only, including a centre channel)The volume of the centre channel is raised to make dialogueeasier to hear.Other menu—Change the display positionPosition1–5: The higher the setting the lower the on-screen menumoves.Status messages0:43 XP18:53:50 11.10. T1 0:05.14 XP T2 0:00.10 XPRemainRECPLAYABCL RVHS RECDVD-RAM Selected drive status/type of discChannel (Analogue broadcast)The name of the station (Digital broadcast).Recording or play status/input channelSelected audio typeAvailable recording time andrecording modeTitle number and elapsed time during play/Recording modeDate and timeNo displayStatus of the other driveTitle number and elapsed time duringrecording/Recording modeThe remaining time appears here while