Panasonic DMR-EZ48V Operating Instructions Manual

Also see for Diga DMR-EZ48V: Operating instructions Help guide Operating instructions Quick setup guide Operating instructions

Contents

30RQT9127Advanced timer recording1 While the unit is onPress [DRIVE SELECT] to select therecording drive and press [∫].2 Press [2, 1] to select “StopRecording” and press [OK].If you stop a timer recording, it will be cancelled. However, ifyou have set a weekly, daily timer recording, the recording willstart from the next time the timer recording is set.Even when the unit is turned off, you can display the timer recordinglist by pressing [PROG/CHECK].1 Press [PROG/CHECK].2 Press [3, 4] to select the programmeand press the “Red” button.≥The timer icon “F” (➡ right) disappears from the timerrecording list.≥You cannot cancel timer recording standby mode as long aseven one timer icon “F” (➡ right) remains in the timerrecording list.≥Press the “Red” button again to activate timer recordingstandby.≥When a timer recording is set, DVDs that were recorded using adifferent TV system cannot be played unless the TV system ischanged in the Setup menu (➡ 62) or the timer recording hascompleted or has been cancelled.≥Timer recordings are activated regardless of whether the unit isturned on/off.≥Timer recordings begin when the set time is reached even whenplaying.≥Timer recordings do not begin while editing or copying.≥If the unit is turned on when timer recording begins, it remainsturned on after recording finishes. It does not turn off automatically.You can turn the unit off during timer recording.≥If the unit is not put in the timer recording standby mode at the last10 minutes before the programmed timer recording starting time,the “F” flashes on the unit’s display.≥When you programme successive timer recordings to startimmediately one after the other, the unit cannot record the part atthe beginning of the later programmes.≥Even when the unit is turned off, you can display the timerrecording list by pressing [PROG/CHECK].Press [PROG/CHECK].A IconsB Message displayed in the “Drive space” lineC Channel name, programme name and otherinformation are displayed∫ To change a programmePress [3, 4] to select the programme and press [OK]. (➡ 29,right column, step 3)∫ To delete a programmePress [3, 4] to select the programme and press [¢ DELETE].You can also delete a programme with the following steps1 Press [3, 4] to select the programme and press [OPTION].2 Press [3, 4] to select “Delete” and press [OK].∫ To exit the timer recording listPress [PROG/CHECK].[Note]≥Programmes that failed to record are deleted from the timerrecording list at 4 a.m. two days later.To cancel recording when recordinghas already begunTo release the unit from recordingstandbyNotes on timer recordingStop RecordingStop Recording CancelTimer recording in progress.Stop this timer recording?It will be cancelled if you stop.OK RETURNSELECTProgramme ProgrammeRecorded RecordedNot recordedCheck, change or delete a programmeF Timer recording standby is activated.[ This programme is currently recording.Programmes are overlapped. Recording of theprogramme with the later start time starts when theearlier programme finishes recording.You stopped a weekly or daily timer recording. The icondisappears the next time the timer programme startsrecording.The disc was full so the programme failed to record.The programme was copy-protected so it was notrecorded.X The programme did not complete recording becausethe disc is dirty or some other reason.Drive: Recording drive is set to DVD or VHS.OK: Displayed if the recording can fit in theremaining space. [DVD]> (Date): For recordings made daily or weekly, the displaywill show until when recordings can be made (upto a maximum of one month from the presenttime) based on the time remaining on the disc.! : It may not be possible to record because:≥The disc is write-protected. [DVD]≥There is no more space left. [DVD]≥The number of possible titles has reached itsmaximum. [DVD]≥The new timer recording will completely orpartially record over this timer recording.– – : All other recordable cases. [VHS]TimerRecording RemainRETURNOKPress OK to store new programme.ModeStopStartNo. Date DriveName DrivespaceNew Timer Programme1:58 SPDVD--:----VHSCTUE 14.10.08. 12:54:00l