Panasonic DMR-EZ48V Operating Instructions Manual

Also see for Diga DMR-EZ48V: Operating instructions Help guide Operating instructions Quick setup guide Operating instructions

Contents

58RQT9127Changing the unit’s settingsYou can change the unit’s settings using Setup menu.≥The settings remain intact even if you switch the unit to standby.1 While stoppedPress [FUNCTION MENU].2 Press [3, 4] to select “To Others”and press [OK].3 Press [3, 4] to select “Setup” andpress [OK].4 Press [3, 4] to select the tab andpress [1].5 Press [3, 4] to select the menu andpress [OK].6 Press [3, 4] to select the option andpress [OK].To return to the previous screenPress [RETURN].To exit the screenPress [EXIT].∫ Edit FavouritesYou can create four groups of channels for making viewing andrecording easier. Editing these groups does not affect the channelsetting itself.≥Timer recording may not work correctly if you edit the groupsduring timer recording standby.Press the “Green” button to select the groups.To add channels to a group1 Press [3, 4] to select the channel in the “All Services” columnand press the “Yellow” button.≥Repeat this step to add other channels.≥Press the “Blue” button to add all the available channels to thegroup. (This function is available only when no channels havebeen added to the group.)2 Press [OK] to save the group.To change the order of channels of a group1 Press [1]§.2 Press [3, 4] to select the channel in the “Favourite” column tomove and press the “Green” button.3 Press [3, 4] to select the new position of the channel and pressthe “Green” button.≥Repeat the steps 2 – 3 to move other channels.4 Press [OK] to save the group.To delete channels on a group1 Press [1]§.2 Press [3, 4] to select the channel in the “Favourite” column andpress the “Yellow” button.≥Repeat this step to delete other channels.≥Press the “Blue” button to delete all the channels from thegroup.3 Press [OK] to save the group.Deleting a channel from a group does not affect the channelitself. You can still select the channel from the “All Services”group.To change the name of a group in the “Favourite”column1 Press [1]§.2 Press the “Red” button.(➡ 46, Entering text)§ When the station name of the “All Services” column is highlighted∫ Auto-Setup RestartDownload from TVYou can restart auto channel setting if set up (➡ 10) fails for somereason.However, if you perform “Auto-Setup Restart”, the order of analoguechannels will change.Select “Download from TV” when you connect the unit to a VIERALink (HDAVI Control 3) compatible TV with an HDMI cable.When the confirmation screen appearsPress [2, 1] to select “Yes” and press [OK].You can also use the following method to restart Auto-Setup.When the unit is on and stoppedPress and hold [X CH] and [CH W] on the main unit until theAuto-Setup screen appears.All the settings except for the ratings level, ratings password andclock settings return to the factory preset. The timer recordingprogrammes are also cancelled.Common proceduresTabs Menus OptionsDiscPictureSoundDisplayTuningConnectionOthersVHSSetup Comb FilterStill ModeOnAutomaticSeamless Play OnOK RETURNTABSELECTTuningEdit FavouritesRETURNSELECTFavourite Select Add AllAddAll Services2A ABC20A ABC HDTVFavourites 1Page -Page +