Panasonic DMR-EZ48V Operating Instructions Manual

Also see for Diga DMR-EZ48V: Operating instructions Help guide Operating instructions Quick setup guide Operating instructions

Contents

64RQT9127Changing the unit’s settings(All factory default settings are indicated with underlined text.)OthersRemote ControlChange the remote control code on the main unit and the remotecontrol (the two must match) if you place other Panasonicproducts close together.[DVD 1] [DVD 2] [DVD 3]Use “DVD 1”, the factory set code, under normal circumstances.1 Press [3, 4] to select the code (“DVD 1”, “DVD 2” or“DVD 3”) and press [OK].To change the code on the remote control2 While pressing [OK], press and hold the numbered button([1], [2] or [3]) for more than 5 seconds.3 Press [OK].∫ When the following indicator appears on theunit’s displayThe unit’s remote control codeChange the code on the remote control to match the main unit’s(➡ step 2).[Note]Executing “Shipping Condition” in the Setup menu returns themain unit code to “DVD 1”. Change the remote control code to 1(➡ step 2).ClockThis unit usually obtains time and date information from digitalbroadcasts and automatically corrects the time several times aday. However, if the time is not set correctly use the settings listedin the method below.≥In the case of a power failure, the clock setting remains inmemory for approximately 60 minutes.1 Press [3, 4] to select “Off” of “Automatic” and press [OK].2 Press [2, 1] to select the item you want to change.The items change as follows:Hour!#Minute!#Second!#Day!#Month!#Year^-----------------------------------------------------------------------------------------JReset the clock regularly to maintain accuracy.(Monthly accuracy +/– 15 seconds.)3 Press [3, 4] to change the setting.You can also use the numbered buttons for setting.4 Press [OK] when you have finished the settings.The clock starts.[Note]If a TV station transmits a time setting signal, and when“Automatic” in the Clock setting menu is set to “On”, the automatictime correction function checks the time and if necessary it isadjusted several times every day.∫ To change the Region1 Press [3, 4] to set “Automatic” to “On” and press [OK] in step1.2 Press [3, 4] to select the correct region and press [OK].Auto clock setting starts. This takes a few minutes.“Automatic clock setting completed.” screen is displayed.3 Press [RETURN] to exit the screen.SetupTuningRemote ControlPress “” and “OK” togetherfor more than 5 seconds on the remotecontrol.DiscPictureClockTimeAutomatic Region SelectionDate15 : 45 : 39 11 . 12 . 2008Off QueenslandPlease set the clock.OK: access RETURN: leaveOK RETURNSELECTCHANGEe.g.,This screen appears whilereceiving a digital broadcast.Power Save[On] Power consumption is minimized when the unit is turned tostandby (➡ 80).[Off](If “Quick Start” is set to “On”, “Power Save” is automaticallyturned to “Off”.)≥Refer to the following when “Power Save” is set to “On”.– “FL Display” is automatically set to “Automatic” (➡ 62).– The “Quick Start” function does not work. (It is automaticallyturned to “Off”.)Quick Start1 Sec. Quick Start for Recording & EPG Display(When connecting to TV using COMPONENT VIDEO, VIDEO or SVIDEO terminals)From the power on, recording on DVD-RAM starts in about 1second after the REC button is pressed. (If the GUIDE button ispressed while the unit is off, the Electronic Program Guide (EPG)displays in less than 1 second.) (Quick Start Mode)[On][Off] Standby power consumption is less than when this is set to“On”.(If this is set to “On”, “Power Save” is automatically turned to “Off”.)≥Startup takes up to a minute when:– You play a disc or start recording to discs other than DVD-RAM.– You want to make other operations.– The clock has not been set.≥Depending on the type of TV or the connected terminal, it maytake time to display the screen.DivX RegistrationYou need this registration code to purchase and play DivX Video-on-Demand (VOD) content (➡ 37).