Panasonic Diga DMR-EZ37 Operating Instructions Manual

Also see for Diga DMR-EZ37: Firmware instructions

Contents

26RQT8849Advanced Video Cassette PlaybackStereo  Mono L  Mono R No display (Normal audio track) Changing Audio during PlaybackAUDIOrepeatedly, to select the audiooption.TipsAuto Bilingual Selection Function [VHS]When a stereo broadcast or multi lingual broadcast is recordedand played back on the unit, stereo sound will be automaticallyselected in the case of a stereo broadcast and SAP sound will beautomatically selected in the case of a multi lingual broadcast.– This function may not work properly if the program is played backfrom a mid point. In a case like this, press [AUDIO] and select theright sound.– The function will not work with a cassette which has been recordedfrom the external equipment.NotesRemaining tape time displayThe displayed time is approximate.The displayed time will be incorrect if you set the wrong tapelength in “Select Tape Length” in the Setup menu ( 43) and if thetape is of poor quality.On-screen Display IndicatorsSTATUSto display on-screen indicators.VHSMono L 0:00.22SP VHS drive indicator Shows which sound mode is selected as follows:Stereo: Hi-Fi stereo audioMono L: Mono L audio of the Hi-Fi stereoaudioMono R: Mono R audio of the Hi-Fi stereoaudioNo indicator: Normal audio Operation status Shows the tape counter and remaining tape timePressing [STATUS] to cycle the display as follows:No display  Tape counter Remaining tape time Press [ CANCEL] to reset the tape counter(elapsed time) to “0:00.00”. The tape counteris automatically reset when inserting a videocassette. Video cassette-in indicator Recording mode ( 14)TipsTo exit on-screen indicatorsPress [STATUS] several times.The following on-screen indicator will not be displayedwhen this unit is connected to the TV with the DVDPRIORITY output terminal. This indicator is onlydisplayed when playing a tape in the VCR. The itemsdisplayed may differ depending on the operatingconditions.