Panasonic Diga DMR-EZ37 Operating Instructions Manual

Also see for Diga DMR-EZ37: Firmware instructions

Contents

3RQT8849IMPORTANT SAFETY INSTRUCTIONSRead these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructionslisted below. Keep these operating instructions handy for future reference.1) Read these instructions.2) Keep these instructions.3) Heed all warnings.4) Follow all instructions.5) Do not use this apparatus near water.6) Clean only with dry cloth.7) Do not block any ventilation openings. Install in accordance withthe manufacturer’s instructions.8) Do not install near any heat sources such as radiators, heatregisters, stoves, or other apparatus (including amplifi ers) thatproduce heat.9) Do not defeat the safety purpose of the polarized or grounding-typeplug. A polarized plug has two blades with one wider than the other.A grounding-type plug has two blades and a third grounding prong.The wide blade or the third prong are provided for your safety. If theprovided plug does not fit into your outlet, consult an electrician forreplacement of the obsolete outlet.10) Protect the power cord from being walked on or pinchedparticularly at plugs, convenience receptacles, and the point wherethey exit from the apparatus.11) Only use attachments/accessories specified by the manufacturer.12) Use only with the cart, stand, tripod, bracket, or tablespecifi ed by the manufacturer, or sold with theapparatus. When a cart is used, use caution whenmoving the cart/apparatus combination to avoidinjury from tip-over.13) Unplug this apparatus during lightning storms or when unused forlong periods of time.14) Refer all servicing to qualifi ed service personnel. Servicing isrequired when the apparatus has been damaged in any way, suchas power-supply cord or plug is damaged, liquid has been spilledor objects have fallen into the apparatus, the apparatus has beenexposed to rain or moisture, does not operate normally, or hasbeen dropped.Unit CareThe precision parts in the unit are readily affected by theenvironment, especially temperature, humidity, and dust. Cigarettesmoke also can cause malfunction or breakdown.To clean the unit, wipe with a soft, dry cloth.Never use alcohol, thinner or benzine to clean the unit.Before using chemically treated cloth, carefully read the instructionsthat came with the cloth.Observe the following points to ensure continued listening andviewing pleasure.Dust and dirt may adhere to the unit’s lens over time, possibly making itimpossible to record or play discs.Use the DVD lens cleaner about once every year, depending onfrequency of use and the operating environment.Carefully read the lens cleaner’s instructions before use.Lens cleaner: RP-CL720PPMaintenance (Cleaning the video heads)Dirt on the video heads can cause poor recording and play.If the picture does not improve, use an optional head-cleaning cassette.If the problem persists, seek advice from a qualified service person.Head-cleaning cassette: NV-TCL30PTCautions about condensationCondensation can cause unreliable playback of VHS recordings.Condensation may form in the following cases,The unit is brought from cold surroundings into a well-heated room.The unit is suddenly brought from cool surroundings, such as an air-conditioned room or car, to a place which is hot and humid.During rainy seasons.In any of the above-mentioned conditions, do not operate the unit for atleast 2 hours. The unit is not equipped with a moisture sensor.Before moving the unit, ensure the disc tray and cassettecompartment are empty.Failure to do so will risk severely damaging the disc, tape and theunit.Do not place the unit on amplifiersor equipment that may become hot.The heat can damage the unit.The unit should not be installedor operated near large magnetsor electromagnetic devices. Suchdevices can damage pre-recorded VHS recordings.Do not place any heavy objects on top of the unit.The unit should not be mounted in a vertical position. It’s designedto operate in the horizontal position.When the unit is not to be used for a long timeTo save power, unplug the AC power supply cord from the household AC outlet. The unit consumes a small amount of power even when it is turned off.Getting StartedFront Display ( 42)Automatic BrightQuick Start ( 40) On Approx. 13 W Approx. 13 WOff Approx. 2 W Approx. 2 WStandby power consumption