Panasonic Diga DMR-EZ37 Operating Instructions Manual

Also see for Diga DMR-EZ37: Firmware instructions

Contents

77RQT8849 ReferenceRecording PageCan I record from acommercially purchased videocassette or DVD?Most commercially sold video cassettes and DVDs are copyprotected; therefore, recording is usually not possible.−Can DVD-R, DVD-R DL,DVD-RW (DVD-Video format),+R, +R DL, and +RW recordedon the unit be played on otherequipment?You can play these discs on compatible equipment such as DVDplayers after finalizing the disc on this unit.38[+RW] It is not necessary to finalize. To enable play on otherDVD players, please use “Create DVD Top Menu” in the DVDManagement menu.39In any case, ability to play a disc depends on the condition of therecording, the quality of the disc, and the capability and formatconstraints of the DVD player.−Can I record digital audio signalsusing the unit?You cannot record digital signals. The digital audio terminals on theunit are for output only. (The audio recorded from a digital videocamcorder using the DV automatic recording function, however, isrecorded digitally.)−Can a digital audio signal fromthe unit be recorded to otherequipment?You can record if using the PCM signal. When recording DVD,change the “Digital Audio Output” settings to the following via theSetup menu:– PCM Down Conversion: “On”– Dolby Digital: “PCM”– DTS: “PCM”However, only– As long as digital recording from the disc is permitted.– As long as the recording equipment is compatible with 48 kHzsampling frequency.42You cannot record MP3 signals. −Can I switch to SAP duringrecording?With DVD-RAM and a video cassette, you can, and the audiorecorded also changes. Press [AUDIO] to change to SAP.13, 15You cannot change the audio type when recording an analog multilingual broadcast on a DVD-R, DVD-R DL, DVD-RW (DVD-Videoformat), +R, +R DL or +RW disc. Establish the appropriate settingbefore recording with “Multi-channel TV Sound (Analog)” in theSetup menu.13, 42Only one language channel is recorded from digital multi lingualbroadcasts, so you will be unable to change languages duringrecording. Set the language in “Audio Language Setting” in theSetup menus.13, 40