Panasonic Diga DMR-EZ37 Operating Instructions Manual

Also see for Diga DMR-EZ37: Firmware instructions

Contents

40RQT8849Changing the Unit’s Settings,  to select “Other Functions”then ENTER,  to select “Setup” then ENTERMenus Items OptionsSetup CableAudio Language SettingChannel SettingsSetupChannnelDiscVideoAudioDisplayTV ScreenVHSSignal Source (Antenna / RF IN)Set Channels AutomaticallyChannel SettingsClosed Caption,  to select a menuthen  to go to the item list.,  to select an item to changethen ENTER,  to choose an optionthen ENTER– Some options require different operations;follow the on-screen prompts.Accessing the Setup menu Summary of SettingsAll factory default settings are indicated with “Underlined”text.ChannelSetupTipsTo return to the previous screenPress [RETURN]. Even if you have changed an option, the changeis not activated until you press [ENTER].To exit the screenPress [RETURN] several times.With the unit stoppedNotesChanged settings remain intact even when switching the unit tostandby.Signal Source (Antenna / RF IN)Select to suit the type of antenna you are using.[Antenna] [Cable]Set Channels AutomaticallyChannel Settings ( 55)Closed Caption ( 46)[Set]: Choose whether to show closed captions.[Analog]: Settings for closed captions in analog broadcasts.[Digital]: Settings for closed captions in digital broadcasts.[Digital Setting]: Detailed settings for closed captions.[CC reset]: Resets settings for closed captions.For details ( 46, Setting the Closed Caption)Audio Language SettingSelect the preferred digital broadcast language.[English] [French] [Spanish]Off TimerSelect how long the unit remains on when it is not being used.[2 Hours] [6 Hours] [Off]Remote Control Code ( 67)[Set Code 1] [Set Code 2] [Set Code 3]Clock SettingsPress [ENTER] to show the following settings.Set Clock Automatically ( 57)Set Clock Manually ( 54)Set the time change dates for DST ( 57)Set the beginning and end dates for DST.Adjust Time Zone ( 57)This corrects the time set in Auto Clock Setting.The status is not displayed on the Setup menu when the AutoClock Setting is not set.[1] [0] [1]Quick Start1 Sec. Quick Start for Recording on DVD-RAM.From the power off state, recording on DVD-RAM starts about1 second after first pressing the [ DVD/VHS POWER] and thensequentially pressing [REC] (Quick Start Mode).Power consumption is also higher when the unit is turned off if thisis set to “On”.[On] [Off]Restore Default SettingsThis returns Setup menus to default settings, except for the clock,channel settings, ratings level, closed caption, and on-screenlanguage.[Yes] [No]