Panasonic Diga DMR-EZ37 Operating Instructions Manual

Also see for Diga DMR-EZ37: Firmware instructions

Contents

8RQT8849POWERDVD/VHSto turn the unit on.DRIVESELECTto select the drive (DVD or VHS).Insert a disc or VHS cassette.– Insert a disc or VHS cassette with enough remaining blank space( 65).TRACKING/V-LOCKCH to select desired channel.Antenna Mode: Cable TV Mode:– To select with the numbered buttons ( 6).– When no channel setting is performed on the unit and broadcastis recorded directly from the cable box or satellite receiver,select a channel on the connected equipment and press[INPUT SELECT] to select “IN1” or “IN2”.REC MODEto select the recording mode.Recording mode ( 14) Remaining timeRECto start recording.Recording Television ProgramsPreparation:Turn on the television and select the appropriate video input to suit theconnections to this unit.[RAM] If the disc is protected, release protection ( 36).[VHS] Ensure accidental erasure tab is intact.Pausing RecordingPress [ PAUSE].– Press again to restart recording.Stopping RecordingPress [ STOP].Refer to “Important Notes for Recording” ( 13) and “Advanced Recording”( 14 to 17) for detail information on recording.[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [VHS]Digital broadcasts cannot be recorded to video tape.Notes[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] It takes about 30 seconds for the unit to completerecording management information after recording fi nishes.You cannot change the channel or recording mode during recording.Simultaneous recording to both DVD and VHS is not possible.POWERPOWERSLOW/SEARCHSCHEDULEENTERFUNCTIONSTV/VIDEOPAUSESTOP3216549870REC MODERETURNSUB MENUCM SKIPDIRECTNAVAIGATAAORDISPLAYAUDIORECDRIVESELECTF Rec STATUSCHAPTERCREATEINPUT SELECTCANCEL DELETECHCHPLAYVOLDVD/VHSVCR/TVTRACKING/V-LOCKSKIP/ INDEX REW FFTIME SLIP// JET REWRESETTipsIcons such as “ [RAM] ” indicate usablediscs. Refer to pages 62 and 63.