- 117 -∫ To dub using equipment with an SD card slotYou can dub by directly inserting an SD card.∫ To dub using equipment with a USB terminalYou can dub by connecting a USB cable.≥ Use the AC adaptor to free you from worrying about the battery running down.≥ Turn on the unit.A USB cable (supplied)B Turn the side with the symbol up to connect the micro B end of the USB Cable to the USBterminal of this unit.≥ Insert the plugs as far as they will go.1 Connect the unit to the Blu-ray disc recorder or high-definition (AVCHD)compatible DVD recorder.≥ The USB function selection screen will appear on the screen of the unit.2 Touch [RECORDER] on the screen of this unit.≥ When you select an option other than [RECORDER], reconnect the USB cable.≥ When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen to turnthe LCD monitor on.3 Dubbing through operations on the Blu-ray disc recorder or high-definition(AVCHD) compatible DVD recorder.Dubbing in high-definition picture qualityAbout the screen indication of the unit≥ When the unit is accessing the SD card, card access icon ( ) appears on the unit screenor the access lamp is on.≥ Be careful not to disconnect the USB cable, AC adaptor or battery while the unit is accessingthe media, as this may result in the loss of recorded content.
