- 126 -∫ If the device is Android (non-NFC-compatible) or iOSOperate this unit and the smartphone to set up a direct connection.Check the [Direct Connection Password] setting in [Wi-Fi Setup]. (l 166)≥ The default setting for [Direct Connection Password] is [OFF].Select [ON] as needed, for example when the setting seems necessary for your Wi-Fienvironment.≥ When [Direct Connection Password] is set to [OFF]j Connecting with [Direct Connection Password] set to [OFF] (l 160)≥ When [Direct Connection Password] is set to [ON][HC-W570PP]:Enter SSID and Password or scan QR code to connect.j [WPS Connection] (l 160)j Connecting with QR code (l 161)j Connecting by entering an SSID and Password (l 161)When the Wi-Fi connection is complete, proceed to “Using [Link to Cell] with a direct connection”.(l 127)1 Check if the wireless access point is compatible with IEEE802.11b/g/n.2 Set up a Wi-Fi connection between this unit and the wireless access point.≥ [WPS Connection] (l 156)≥ Searching for wireless access points to set up a connection (l 157)≥ Setting up a connection manually (l 158)When the Wi-Fi connection is complete, proceed to “Using [Link to Cell] with a wireless access pointconnection”. (l 128)≥ Using [Wi-Fi Setup Wizard], you can also set up a Wi-Fi connection in conjunction with thesmartphone application “Image App”. (l 154)Setting up a Wi-Fi connection via a wireless access point
