- 134 -You can confirm the recording screen of this unit from outside using a smartphone.Preparations before using [Home Cam]1 Check if the wireless access point is compatible with IEEE802.11b/g/n.2 Install the smartphone application “Image App” on your smartphone. (l 152)3 Check if the smartphone is an Android (NFC-compatible), Android (non-NFC-compatible), or iOS device.≥ If the smartphone is NFC-compatible, the NFC mark is displayed when you start up “Image App”.4 Set up a Wi-Fi connection between this unit and the wireless access point.≥ [WPS Connection] (l 156)≥ Searching for wireless access points to set up a connection (l 157)≥ Setting up a connection manually (l 158)When the Wi-Fi connection is complete, proceed to “Using [Home Cam]”.≥ Using [Wi-Fi Setup Wizard], you can also set up a Wi-Fi connection in conjunction with thesmartphone application “Image App”. (l 154)Wi-Fi[Home Cam]≥ Switch the Wi-Fi setting to off on your smartphone and use with mobile network suchas 3G.≥ If [CLOCK SET] (l 20) is not set correctly, [Home Cam] cannot be used.≥ Check your contract details carefully, as smartphone and internet contract details mayresult in high communication charges being incurred, or a limit placed oncommunication traffic.Caution:This function is not designed for anti-theft or disaster use.XXXXXXXXXXXXXXXXXX
