- 135 -Using [Home Cam]≥ Perform the home monitoring operation on the smartphone. (l 138)≥ When the firewall is turned on, the Wi-Fi function may not work correctly. If this occurs, check thenetwork settings.∫ If the device is Android (NFC-compatible)≥ Set the NFC function of the smartphone to on.1 Turn off the Wi-Fi setting of the smartphone.2 Start up the smartphone application “Image App”.≥ When a Wi-Fi connection guidance screen is displayed, select [NO].3 Enable the home monitoring setting from the menu of the smartphoneapplication “Image App”.≥ Select [ (MENU)] # [Application function] # [Home Monitor], and enable [Use HomeMonitor].4 Select [Set connect. dest.] of the smartphone.5 Touch the smartphone on of this unit.≥ Touch the NFC mark while a message asking you to touch theNFC mark on the device is displayed on the smartphone screen.≥ If this is the first time the smartphone is connecting to this unit,touch [YES] on the screen of this unit, and then touch thesmartphone on of this unit again.≥ If the unit is not recognized even when touching the smartphone,change positions and try again.≥ The connection cannot be established while this unit is recording.≥ Check that the message “Connecting...” has disappeared from this unit.6 When [Start “Home Cam”?] is displayed on the smartphone, select [YES].7 Start home monitoring.∫ Connecting with Android (non-NFC-compatible) or iOS device1 Press Wi-Fi button on this unit and touch [Home Cam].2 Turn off the Wi-Fi setting of the smartphone.3 Start up the smartphone application “Image App”.≥ (If the device is Android)When a Wi-Fi connection guidance screen is displayed, select [No].≥ (If the device is iOS)If a confirmation message for the Wi-Fi setup is displayed, select [Close].4 Enable the home monitoring setting from the menu of the smartphoneapplication “Image App”.≥ Select [ (MENU)] # [Application function] # [Home Monitor], and enable [Use HomeMonitor].5 Select [Set connect. dest.] of the smartphone.When using the home monitor function for the first time
