- 125 -Using a smartphone, you can perform record/playback operations from a remote location or uploadmotion pictures and still pictures recorded in this unit on SNS (Social Networking Service).A When connecting directly to a smartphoneB When connecting to a wireless access point≥ Refer to [Help] in the “Image App” menu about how to operate.Preparations before using [Link to Cell]1 Install the smartphone application “Image App” on your smartphone. (l 152)2 Check if the smartphone is an Android (NFC-compatible), Android (non-NFC-compatible), or iOS device.≥ If the smartphone is NFC-compatible, the NFC mark is displayed when you start up “Image App”.Using NFC, you can easily set up a direct connection between this unit and the smartphone.∫ If the device is Android (NFC-compatible)Use NFC to set up a direct connection between this unit and the smartphone.≥ Proceed to “Using [Link to Cell] with a direct connection”. (l 127)Wi-Fi[Link to Cell]≥ You need to turn on the Wi-Fi function of your smartphone.≥ Do not remove the SD card during remote operations.Caution:Be sure to pay special attention to the privacy, the Portrait rights, etc. of the subject when you usethis function. Use at your own risk.Setting up a direct Wi-Fi connection between this unit and asmartphone
