- 167 -This will set/clear the Password to limit the startup of the Wi-Fi setting menu.By setting the Password, it will prevent erroneous operation, prevent wrongful use of the Wi-Fifunction by third party, and protect the set personal information.1 Touch [Setup].2 Touch [INPUT], and enter the Password (6 characters).≥ After finish entering the Password, touch [Enter].≥ If the Password has already been set, is displayed.≥ For details on how to enter characters, refer to page 88.3 Touch [NEXT].4 Touch [INPUT], and enter the same Password again.≥ After finish entering the Password, touch [Enter].≥ If the Passwords match with each other, a message is displayed.5 Touch [EXIT].≥ If you set the Wi-Fi Password, you will need to enter the Password each time you touch [Wi-FiSetup] on the Wi-Fi home screen.≥ When you forget your Wi-Fi Password, perform [Reset Wi-Fi Settings] from the Setup menu. Thiswill set the Wi-Fi setting to the condition at the time of purchase, and you will be able to use theWi-Fi setting menu. (l 35)You can change the Wi-Fi setting back to the default condition.≥ The “LUMIX CLUB” Login ID and Wi-Fi Password are also deleted.You can view and change this unit’s Device name (SSID), which is used for operating this unit as awireless access point.1 Touch [INPUT], and enter the desired Device name (SSID).≥ Input up to 20 characters are recommended. All the characters cannot be confirmed whendisplaying the Device names on this unit if a long Device name is used. (l 160)≥ For details on how to enter characters, refer to page 88.≥ Touch [Enter].2 Touch [EXIT].≥ If you are going to connect directly to a smartphone after changing the Device name (SSID), setthe connection again with the changed Device name (SSID). (l 160)≥ The Password entered during the setting of direct connection cannot be changed. (l 160)[Menu Password] [Setup]/[Delete][Reset Wi-Fi Settings][Device Name]
