- 177 -5 On the smartphone, select [QR code] to scan the QR code displayed on thescreen of this unit.≥ When using an iOS device, perform the following operations:1 Select the option that allows you to install the app on the profile screen of the “Image App”, andfollow the on-screen instructions to complete the installation.2 Press the home button to close the displayed screen.3 Touch [NEXT] on the screen of this unit to display its SSID.4 After selecting the network name (SSID) of this unit from the Wi-Fi setup of the smartphone,start up “Image App”.≥ When the connection is complete, the image being captured by the smartphone will be displayedon the Sub Window of this unit.≥ If the QR code cannot be scanned, refer to “Selecting this unit’s SSID and entering a passwordon the smartphone to set up a connection”. (l 175)When connecting for the second time or later1 Touch the recording screen on this unit andtouch .2 Start up the smartphone application “Image App”.3 (If the device is Android (NFC-compatible))Touch the smartphone on of this unit.≥ This unit and the smartphone will be connected via Wi-Fi. When the connection is complete, theimage being captured by the smartphone will be displayed on the Sub Window of this unit.≥ If the connection cannot be established or no image appears on the Sub Window, follow the stepsbelow to set up the connection again:1 Close the smartphone application “Image App”.2 Touch the screen of this unit again and touch .3 Touch [Change Device] on the screen of this unit.After completing the steps above, follow the procedure from Step 2 onwards in “When connecting asmartphone to this unit as a Wireless Sub Camera for the first time”.≥ [History] allows you to set up a Wi-Fi connection with the Wi-Fi function settings you have usedbefore. (l 162)Terminating the connection1 Touch the recording screen on this unit andtouch .2 Touch [EXIT] on the screen of this unit.≥ The Wi-Fi connection will be terminated.≥ Close the “Image App” on the smartphone.≥ You can also terminate the connection by pressing the Wi-Fi button on this unit.If you press the Wi-Fi button during recording pause, a message will be displayed. To terminatethe connection, touch [YES].
