102VQT3U98Connecting to a PC≥ Connect this unit to the PC after the software applications are installed.≥ Remove the supplied CD-ROM from your PC.A USB cable (supplied)≥ Insert the plugs as far as they will go.≥ Insert the SD card.1 Connect this unit to the AC adaptor.≥ Use the AC adaptor to free you from worrying about the battery running down.2 Turn on the unit.≥ This function is available in all modes.3 Connect this unit to a PC.≥ The USB function selection screen will appear on the screen of the unit.4 Touch [PC] on the screen of this unit.≥ The Smart Wizard Screen is automatically displayed when HD Writer XE 1.0 is installed.≥ This unit is automatically recognized as an external drive of the PC. (l 103)≥ When you select an option other than [PC], reconnect the USB cable.≥ When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screento turn the LCD monitor on.≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteedwith any other USB cables.)≥ When performing reading/writing between a PC and an SD card, be aware that some SDcard slots built into PCs and some SD card readers are not compatible with the SDHCMemory Card or SDXC Memory Card.≥ When using an SDXC Memory Card, check the following support site.http://panasonic.net/avc/sdcard/information/SDXC.html∫ To disconnect USB cable safelySelect the icon in task tray displayed on the PC, and then click [Eject PanasonicCamcorder].≥ Depending on your PC’s settings, this icon may not be displayed.
