64VQT3U98Setting the Time CodeTime code will display the recording time in hours, minutes, seconds, and frames.TC 00:00:00:00 (hour : minute : second : frame [NDF])TC 00:00:00.00 (hour : minute : second . frame [DF])≥ The frame (Number of frames counted every second) will vary depending on the[REC FORMAT] setting. (l 115)Select the compensation mode for the time code.≥ It is automatically set to [NDF] when the [REC FORMAT] is set to [1080/24p] or the intervalrecording is used.Sets the way the time code will move.* An error may occur when the playback mode is switched when the [REC FORMAT] is setto [1080/24p].≥ It is automatically set to [FREE RUN] when it is set to PRE-REC.≥ The time code will reset when the built-in lithium battery is exhausted when it is set to[FREE RUN].Recording format Frame[1080/60p], [1080/60i], [1080/30p], [PH], [HA], [HE] 0 to 29[1080/24p] 0 to 23[TC MODE]: [RECORD SETUP] # [TC MODE] # desired setting[DF]: Time code is compensated in accordance with the actual time. Itis mainly used for broadcasting such as TV programs.[NDF]: It will not compensate the time code. (There will be a differencefrom the actual time)[TCG]: [RECORD SETUP] # [TCG] # desired setting[FREE RUN] *: It will constantly move.[REC RUN]: It will move only when recording.MENUMENU
