61VQT3U98Adjusting the audio input level∫ Adjusting the input level of the built-in microphone (5.1 ch)≥ Set the [MIC SETUP] to anything other than [2ch]. (l 57)1 Select the menu.2 (When [SET]/[SETr ] is selected)Touch / to adjust the microphoneinput level.≥ Touch to activate/disactivate ALC. When ALC isactivated, the icon is surrounded by yellow and theamount of sound distortion can be reduced. WhenALC is disactivated, natural recording can beperformed.≥ Adjust the microphone input level so that the last2 bars of the gain value are not red. (Otherwise, thesound is distorted.) Select a lower setting formicrophone input level.3 Touch [ENTER] to set the microphoneinput level and then touch [EXIT].≥ is displayed on the recording screen when the ALC is turned on.≥ When [MIC SETUP] is [ZOOM MIC], the volume will be different depending on the zoomrate.≥ You cannot record with the audio completely muted.: [RECORD SETUP] # [5.1ch MIC LEVEL] # desired setting[AUTO]: ALC is activated, and the recording level is adjustedautomatically.[SET]/[SETr ]: The desired recording level can be set.MENUA CenterB Front leftC Back leftD Front rightE Back rightF Microphone input level
