39VQT3U98Convergence point adjustment∫ About the convergence pointConvergence point is a position that becomes the reference plane of the 3D image.When viewing the 3D image, a subject located closer than the convergence point isdisplayed in front of the screen, and a subject located farther than the convergence point isdisplayed behind the screen.∫ Adjusting the convergence pointIt is recommended to prepare for recording, such as adjust the convergence point inaccordance with the position of the subject in advance, determine the construction of theimage to record, etc., to record an image that is effective as 3D video. It is alsorecommended to adjust the convergence point again when the distance between this unitand the subject is changed significantly.1 Display the convergence.To ensure that the 3D image can be safely viewed, pay attention to the followingpoints when adjusting the convergence point.≥ The image may cause tiredness or discomfort when adjustment of the convergence pointis frequently performed, or the position of the subject is further away in front or rear of theconvergence point or at the edge of the image.≥ Stop the operation when you feel fatigue, discomfort, or otherwise strange whileadjusting.: [SW & DISP SETUP] # [CONVERGENCE] # [ON] A Convergence pointB Display in front of the screenC Display behind the screen* The image is an illustration.MENU
