103VQT3U98About the PC displayWhen the unit is connected to a PC, it is recognized as an external drive.≥ Removable disk (Example: ) is displayed in [Computer].Example folder structure of an SD card:The following data will be recorded.1 MPO system/JPEG system stillpictures (up to 999 still pictures canbe recorded. ([11000001.MPO],[11000001.JPG], etc.))2 MPO system/JPEG system stillpictures created from motionpictures3 The motion picture thumbnails4 AVCHD format motion picture files([00000.MTS] etc.)∫ Copying your still pictures toyour PCCard reader function (mass storage)Still pictures recorded with this unit can becopied to the PC with Explorer or otherprogrames.1 Double click the folder that containsthe still pictures. ([DCIM] #[100CDPFQ] etc.)2 Drag and drop the still pictures ontothe destination folder (on the PC’sHDD).≥ Do not delete the SD card’s folders. Doingso may make the SD card unusable in thisunit.≥ When data not supported by this unit hasbeen recorded on a PC, it will not berecognized by this unit.≥ Always use this unit to format SD cards.About the screen indication of the unit≥ Do not disconnect the USB cable, battery, or AC adaptor while the access lamp is on orcard access icon ( ) appears on the unit screen.≥ If the screen does not change when the unit is operated while connected to a PC,disconnect the battery and/or AC adaptor, wait approximately 1 minute, reconnect thebattery and/or AC adaptor, wait approximately 1 minute again, and then turn the unitback on. (Data may be destroyed when above operation is performed while accessingthe SD card.)We recommend using HD Writer XE 1.0to copy motion picture data.Using Windows Explorer or otherprogrames on the PC to copy, move orrename files and folders recorded withthis unit will result in them being unusablewith HD Writer XE 1.0.DCIMCAM_SD100CDPFQ101CDPFSAVCHDTNBDMVAVCHDPRIVATE
