116VQT3U98≥ Recordable time using the battery (l 20)≥ This function’s default setting is [1080/60i] (3D Recording Mode)/[HA] (2D RecordingMode).≥ Please refer to page 147 about approximate recordable time.≥ When the unit is moved a lot or moved quickly, or when a fast-moving subject is recorded(particularly when recording in [HE] mode), mosaic-type noise may appear at playback.You can set the relay recording and backup recording.≥ Insert SD cards to card slot 1 and card slot 2.∫ Relay recordingIt is possible to continuously record on the SD card in the other card slot even when theavailable capacity of the SD card runs out during the recording.≥ is displayed on the media to record the video. will disappear when the recordingmedia is switched and the relay recording is started.≥ Relay recording can only be performed once.∫ Backup recordingSame motion picture can be recorded on two SD cards.≥ is displayed on the cards the motion pictures is recorded.≥ When [SD CARD 1] is selected as the destination of recording the motion pictures, backupwill be recorded on [SD CARD 2].≥ It is recommended to record on the SD cards that are same speed class and samecapacity when performing the backup recording.(Relay recording)≥ Destination to record still pictures will be switched to other SD card after performing therelay recording.(Backup recording)≥ Backup recording will not be performed for still pictures.[RELAY/BACKUP][OFF]: Cancel the setting.[RELAY]: Set the relay recording[BACKUP]: Set the backup recording
