109VQT3U98∫ Dubbing using equipment without an SD card slot or a USB terminal,or using a video deviceYou can dub by connecting an AV multi cable.≥ The scenes recorded in 3D will be dubbed as 2D video.≥ Images are dubbed in standard quality.≥ Use the AC adaptor to free you from worrying about the battery running down.≥ Change the mode to .≥ Set [AV MULTI] to [AV OUT]. (l 90)1 Connect this unit to a video device and start playback on this unit.2 Start recording on the connected device.≥ To stop recording (dubbing), stop playback on this unit after stopping recording on therecorder.≥ If the date and time display and function indication are not wanted, cancel them beforedubbing. (l 89, 124)Dubbing in standard picture qualityChange the video input on thevideo device and TV that thisunit is connected to.≥ The channel set will differ dependingon the terminal to which the unit isconnected.≥ See the operating instructions of thevideo device for details.≥ Insert the plugs as far as they will go.≥ Do not use any other AV multi cablesexcept the supplied one.A AV multi cable (supplied)If the dubbed images are played back on a wide-screen TV, the images may be stretchedvertically.In this case, refer to the operating instruction for the device you are connecting to or readthe operating instructions of the wide-screen TV and set the aspect ratio to 16:9.AV MULTI
