76VQT3U98ZebraZebra display:Parts where white saturation (color saturation) is likely to occur (extremely brightly lit or shinyparts) are displayed with diagonal lines (zebra pattern).Marker display:Displays the luminance level of the center of the screen (luminance display frame) in %.It makes the adjustment of the brightness of the object easier, by checking the luminancelevel of the object, when recording same object in different surroundings.≥ Marker display is displayed between 0% and 99%. It will be displayed as 99% when it isover 99%.≥ You can record an image with little white saturation if you manually adjust the shutterspeed or brightness. (l 54, 56)≥ The zebra pattern does not appear on the images actually recorded.≥ It is also possible to adjust the level of the zebra pattern to be displayed. (l 122)Color Bar Screen≥ To cancel, press the BARS button again.≥ It will be canceled when the unit is turned off.≥ While the color bar is displayed, a test tone will be output from the headphone terminal,HDMI terminal and AV multi terminal. (The test tone that is output will be 1 kHz.) It will notbe output from the speaker of this unit.≥ It is possible to record the color bar screen.ZEBRA buttonIt will switch between the zebra display and the marker display every time the button ispressed.Zebra 1 # Zebra 2 * # Marker * # setting canceled* It is not displayed when the [ZEBRA DETECT 2]/[MARKER] is set to [OFF]. (l 123)BARS buttonPress the BARS button to output a color bar screen to a television or monitor so you canadjust them.
