Connections and Setup19For Fax Advantage assistance, call 1-800-435-7329.How to set upWhen you are IN house orofficeSet the fax machine to TEL mode by pressing{AUTO ANSWER} until the following isdisplayed.How to receive callsWith the fax machine1 When the fax machine rings, press{DIGITAL SP-PHONE} or lift the handset.2 If document reception is required, a faxcalling tone (slow beep) is heard, or nosound is heard, press {FAX/START}.3 Replace the handset if using it.L The fax machine will start fax reception.With an extension telephone1 When the extension telephone rings, lift thehandset of the extension telephone.2 When document reception is required, a faxcalling tone (slow beep) is heard, or nosound is heard, press {*}{#}{9} (pre-selected fax activation code) firmly.3 Replace the handset.L The fax machine will start fax reception.Note:L You can change the fax activation code infeature #41 (page 72).When you are OUT of house oroffice1 Set feature #77 to TAD/FAX mode (page74) beforehand.2 Press {AUTO ANSWER} until the followingis displayed.L The display will show the number ofrings before the unit answers a call inTAD/FAX mode.3 Press {+} or {-} to select the desired ringsetting and press {SET}.How to receive callsIf the call is a phone call, the fax machine willrecord voice message automatically.If a fax calling tone is detected, the fax machinewill receive a fax automatically.Note:L Do not connect an answering machine to thesame telephone line. If connected, setautomatic answer feature to off.L Do not subscribe to voice mail service.L If you have already subscribed to DistinctiveRing service, refer to page 49.L If the fax machine is used only for faxreception, refer to page 47.{FAX/START}{AUTO ANSWER}{SET}{+}{-}{DIGITAL SP-PHONE}ONOFFTEL MODEONOFFTAD/FAX MODE2 RINGS
