Features Summary72Code #36: Receiving oversized documentsRCV REDUCTIONMODE=92% [±]If the size of the document sent by the otherparty is as large as, or larger than the recordingpaper, the unit can reduce the document andprint it. Select the desired reduction rate.Code #39: Changing the display contrastLCD CONTRASTMODE=NORMAL [±]NORMAL (default): For normal contrast.DARKER: Used when the display contrast is toolight.Code #41: Changing the fax activation codeFAX ACTIVATIONMODE=ON [±]If you use an extension telephone and wish touse it to receive a fax, activate this feature andprogram the activation code.1. Follow steps 1 to 4 on page 69.2. Press {+} or {-} to select “ON”.3. Press {SET}.4. Enter your code from 2 to 4 digits, using 0–9,# and *.L The default code is “@#9”.L Do not enter “0000”.5. Press {SET}.6. Press {MENU}.Code #42: Setting the message alertMESSAGE ALERTMODE=OFF [±]To alert you with beeps when a new voicemessage is recorded. If you hear slow beeps,press {PLAY MESSAGES} and listen torecorded messages. The beeps will stop.ON: You will hear a beeping sound.OFF (default): Deactivates this feature.Code #43: Setting the recording time alertREC. TIME ALERTMODE=OFF [±]To alert you with beeps when there is less than60 seconds of remaining recording time. If youhear slow beeps, erase the recorded messages(page 58, 64). The beeps will stop.ON: You will hear a beeping sound.OFF (default): Deactivates this feature.Code #44: Setting the memory reception alertRECEIVE ALERTMODE=ON [±]To alert you with a beeping sound when areceived fax document is stored into memorydue to some existing problem.If you are alerted by a slow beeping sound, clearthe printing problem and make sure the unit issupplied with enough paper to print the storeddocument. The beeps will stop.ON (default): You will hear a beeping sound.OFF: Deactivates this feature.Code #46: Setting the friendly receptionFRIENDLY RCVMODE=ON [±]To receive a fax automatically when you answera call and hear a fax calling tone (slow beep).ON (default): You do not have to press{FAX/START} for fax reception.OFF: You have to press {FAX/START} for faxreception.Setting Recordingpaper sizeOriginaldocumentsize100% Legal Letter, A492%(default)Letter LetterLegal Legal86% Letter A472% Letter Legal