Panasonic KX-FHD351 Operating Instructions Manual

Contents

Features Summary71Advanced featuresCode #22: Setting the journal report to printautomaticallyAUTO JOURNALMODE=ON [±]ON (default): The unit will print the journalreport automatically after every 30 new faxcommunications (page 39).OFF: The unit will not print the journal report, butkeep records of the last 30 fax communications.Code #23: Sending documents overseasOVERSEAS MODEMODE=ERROR [±]If you have difficulty sending an overseas fax,activate this feature before starting transmission.This feature makes sending documents easieras the transmission speed is slowed down.L This feature is not available for broadcasttransmission.L The calling charge may be higher.NEXT FAX: This setting is effective only for thenext attempted fax transmission. Aftertransmission, the unit will return to the previoussetting.ERROR (default): When the previous faxtransmission fails and you wish to redial thesame number.OFF: Deactivates this feature.Code #25: Sending a fax at a specific timeDELAYED SENDMODE=OFF [±]This feature allows you to take advantage of low-cost calling hours offered by your telephonecompany. This feature can be set up to 24 hoursin advance of the desired time.To send a document:1. Insert the document.2. Follow steps 1 to 4 on page 69.3. Press {+} or {-} to select “ON”.4. Press {SET}.5. Enter the fax number.6. Press {SET}.7. Enter the transmission start time.L Press {*} to select “AM” or “PM”.8. Press {SET}.9. Press {MENU}.L To cancel after programming, press {STOP}then {SET}.Code #26: Setting the Caller ID list to printautomaticallyAUTO CALL. LISTMODE=ON [±]ON (default): The unit will print the Caller ID listautomatically after every 30 new calls (page 34).OFF: The unit will not print the Caller ID list, butkeep records of the last 30 caller information.Code #31: Activating the Distinctive RingfeatureDISTINCTIVE RINGMODE=OFF [±]See page 49 for details.Code #32: Setting the ring pattern for fax(Distinctive Ring feature)FAX RING PATTERNRING=B–D [±]See page 50 for details.Code #34: Setting the quick scanQUICK SCANMODE=OFF [±]This feature is helpful when you want to removethe document for other uses, because the unitwill release the document beforesending/copying.L If the document exceeds the memorycapacity, sending of the whole document orcopying of the exceeded document will becanceled and this feature will be turned offautomatically.ON: The unit will scan the document and store itinto memory first, then the unit will startsending/copying.OFF (default): Deactivates this feature.