Initial Programming25For Fax Advantage assistance, call 1-800-435-7329.Setting your logoThe logo can be your company, division or name.1 Press {MENU}.SYSTEM SET UPPRESS NAVI.[( )]2 Press {<} or {>} until the following isdisplayed.YOUR LOGOPRESS SET3 Press {SET}.LOGO=4 Enter your logo, up to 30 characters, usingthe dial keypad. See page 26 for details.Example: “Bill”1. Press {2} 2 times.L Cursor (|) will appear on the display.LOGO=|B2. Press {4} 3 times.LOGO=B|I3. Press {5} 3 times.LOGO=BI|L4. Press {>} to move the cursor to thenext space and press {5} 3 times.LOGO=BIL|L5 Press {SET}.L The next feature will be displayed.6 Press {MENU}.Note:L You can enter your logo by pressing {+} or{-} in step 4. In this case, press {>} tomove the cursor (see page 26 for details).To change capital or lower-case lettersPressing the {#} key will change to capital orlower-case alternately.1. Press {2} 2 times.LOGO=|B2. Press {4} 3 times.LOGO=B|I3. Press {#}.LOGO=B|i4. Press {5} 3 times.LOGO=Bi|lTo correct a mistakePress {<} or {>} to move the cursor to theincorrect character, and make the correction.To delete a characterPress {<} or {>} to move the cursor to thecharacter you want to delete and press {STOP}.To insert a character1. Press {<} or {>} to move the cursor to theposition to the right of where you want toinsert the character.2. Press {MUTE} to insert a space and enterthe character.{SET}{<}{>}{+}{-}{STOP}(Delete){FLASH}(Hyphen){MUTE}(Insert){MENU}
