Sending Faxes41Sending a fax using one-touch dial and navigatordirectoryBefore using this feature, program the desired names and telephone numbers into one-touch dial andnavigator directory (page 28, 29).1 Adjust the width of the document guides tothe size of the document.2 Insert the document (up to 10 pages) FACEDOWN until a single beep is heard and theunit grasps the document.STANDARDPRESS NAVI.[+ -]3 If necessary, press {+} or {-} repeatedlyto select the desired resolution (page 38).4 Enter the fax number.Using stations 1–5:Press the desired station key.Using stations 6–10:Press {LOWER}, then press the desiredstation key.Using navigator directory:Press {<} or {>}, then press {+} or {-}to display the desired entry and press{SET}.L If the desired name has not been storedin navigator directory, press {STOP}and dial the number manually.Fax auto redialIf the line is busy or if there is no answer, the unitwill automatically redial the number up to 2times.L This feature is also available for delayedtransmission (feature #25 on page 71).L During redial, the following will be displayed.WAITING REDIALL To cancel redialing, press {STOP}.If your unit does not send a faxL Confirm the stored telephone number on thedisplay and check that the number dialed isanswered by the other party’s machine.L The connecting tone will be heard duringdialing to tell you the status of the otherparty’s machine (feature #76 on page 74).{SET}{<}{>}{+}{-}Station keysDocument guides{STOP} {LOWER}FACE DOWN
