Automatic Dialing28TelephoneStoring names and telephone numbers intoone-touch dialFor rapid access to frequently dialed numbers, the unit provides 10 entries for one-touch dial.L Station 1 can be used alternatively as broadcast key (page 42).1 Press {MENU} repeatedly until thefollowing is displayed.DIRECTORY SETPRESS STATION ORbDIRECTORY SETPRESS NAVI.2 Select the desired station key.For station 1:1. Press station 1.STATION 1DIAL MODE [±]2. Press {SET}.For stations 2–5:Press one of the station keys.For stations 6–10:Press {LOWER}, then press one of thestation keys.3 Enter the name, up to 10 characters (seepage 26 for instructions).Example: NAME=JOHNSTORE:PRESS SET4 Press {SET}.Example: =5 Enter the telephone number, up to 30 digits,using the dial keypad.Example: =1114497L If you want to enter a hyphen, press{FLASH}.6 Press {SET}.REGISTEREDuDIRECTORY SETPRESS STATION ORbDIRECTORY SETPRESS NAVI.L To program other entries, repeat steps 2to 6.7 Press {STOP} to exit the program.Helpful hint:L You can confirm the stored entries in thetelephone number list (page 90).Note:L A hyphen or a space entered in a telephonenumber counts as two digits.To correct a mistakePress {<} or {>} to move the cursor to theincorrect character/number, and then make thecorrection.To delete a character/numberPress {<} or {>} to move the cursor to thecharacter/number you want to delete, and press{STOP}.{SET}{<}{>}{STOP}(Delete){FLASH}(Hyphen){LOWER}{MENU}Station keys
