4.6.6.3 Ringing ToneTone FrequenciesDescription Specifies the dual-tone frequencies, in hertz, of ringback tones using2 whole numbers separated by a comma.Value Range 0, 200–2000 (0: No tone)Note• If the value for this setting is "440,480", the unit will use amixed signal of a 440 Hz tone and a 480 Hz tone.Default Value 440,480Configuration File Reference RINGBACK_TONE_FRQTone TimingsDescription Specifies the pattern, in milliseconds, of ringback tones using up to10 whole numbers (off 1, on 1, off 2, on 2…) separated by commas.Note• It is recommended that you set a value of 60 milliseconds ormore for the first value (off 1).Value Range 0–16000 (0: Infinite time)Note• Avoid setting 1–50 for any of the values.Default Value 60,2000,3940Configuration File Reference RINGBACK_TONE_TIMING4.6.6.4 Stutter ToneTone FrequenciesDescription Specifies the dual-tone frequencies, in hertz, of stutter dial tones tonotify that a voice mail is waiting, using 2 whole numbers separatedby a comma.Value Range 0, 200–2000 (0: No tone)Note• If the value for this setting is "350,440", the unit will use amixed signal of a 350 Hz tone and a 440 Hz tone.Default Value 350,440Configuration File Reference DIAL_TONE4_FRQ4.6.6 Tone Settings148 Administrator Guide Document Version: 2017-07
