Value Range 1-65535Default Value 9000Configuration File Reference TWAMP_TEST_PORTWait Time for ControlDescription Specifies the time, in seconds, for the TWAMP server to wait forincoming packets for maintaining the session.Value Range 1-65535Default Value 900Configuration File Reference TWAMP_SERVER_WAIT_TIMEWait Time for ReflectorDescription Specifies the time, in seconds, for the TWAMP reflector to wait forincoming packets for maintaining the session.Value Range 1-65535Default Value 900Configuration File Reference TWAMP_REFLECTOR_WAIT_TIME4.4 SystemThis section provides detailed descriptions about all the settings classified under the [System] tab.4.4.1 Language SettingsThis screen allows you to select the language used for the Web user interface. The language setting is onlyapplicable when you log in to the Web user interface as User.Note• If you change the language while logged in to the Web user interface with the User account, thelanguage will be changed after the message "Complete" is displayed. If you are logged in with theAdministrator account, the language will be changed when a user logs in to the Web user interface asUser.• The language used for the Web user interface for the Administrator account is always English.• The language used for the unit remains unchanged even if the language for the Web user interface ischanged.4.4 SystemDocument Version: 2017-07 Administrator Guide 97
