Auto DNS via DHCPDescription Selects whether to enable or disable the DNS server obtained byDHCPv6.Note• This setting is available only when [Connection Mode] is setto [DHCP].Value Range • Yes: Use DNS obtained by DHCPv6• No: Not use (use static DNS)Default Value YesConfiguration File Reference DHCP_DNS_ENABLE_IPV6DNS1Description Specifies the IP address of primary DNS server for IPv6.Value Range Max. 39 charactersn:n:n:n:n:n:n:n [n=0-FFFF, abbreviation available]Default Value Not stored.Configuration File Reference USER_DNS1_ADDR_IPV6DNS2Description Specifies the IP address of secondary DNS server for IPv6.Value Range Max. 39 charactersn:n:n:n:n:n:n:n [n=0-FFFF, abbreviation available]Default Value Not stored.Configuration File Reference USER_DNS2_ADDR_IPV64.3.2 Ethernet Port SettingsThis screen allows you to change the connection mode of the Ethernet ports, LLDP and the VLAN settings.Note• When you change the settings on this screen and click [Save], after the message "Complete" hasbeen displayed, the unit will restart automatically with the new settings applied. If a unit is on a callwhen "Complete" has been displayed, the unit will restart after the unit returns to idle.4.3.2 Ethernet Port SettingsDocument Version: 2017-07 Administrator Guide 71
