RTCP_SEND_BY_SDP_nFor details about parameter names end with "_n", see 5.2.1 Configuration File ParametersValue Format INTEGERDescription Specifies whether to send RTCP signals by SDP (SessionDescription Protocol).Value Range 0–1– 0: Send RTCP signals using the value specified in"RTCP_INTVL_n", if the "RTCP_ENABLE_n" parameter is enabled.– 1: Send RTCP signals using the value specified in the SDPattribute "a=rtcp:".Default Value 0RTP_CLOSE_ENABLE_nFor details about parameter names end with "_n", see 5.2.1 Configuration File ParametersValue Format BOOLEANDescription Specifies whether to enable processing to close held RTP sockets.Value Range • Y: Enable RTP Close• N: Disable RTP CloseDefault Value NRTCPXR_ENABLE_nFor details about parameter names end with "_n", see 5.2.1 Configuration File ParametersValue Format BOOLEANDescription Specifies whether to enable or disable RTCP-XR.Value Range • Y: Enable RTCP-XR• N: DisableDefault Value NWeb User Interface Reference Enable RTCP-XR5.3.27 SRTP SettingsSRTP_CONNECT_MODE_nFor details about parameter names end with "_n", see 5.2.1 Configuration File ParametersValue Format INTEGERDescription Specifies the mode of SRTP feature.5.3.27 SRTP SettingsDocument Version: 2017-07 Administrator Guide 299
