• Button 1 is set to log in and log out of an ACD group on line 6.• Buttons 2, 6 and 10 are set to show the status of a certain extension. They can also be used to call thatextension and transfer calls to it.*1• Buttons 3, 7 and 9 are set to make calls to a certain destination using the One-Touch Dialing feature.• Button 4 is set to log in and log out of an ACD group on line 5.• Buttons 5 and 8 are set to make calls to a certain destination using the Line feature.*1 You can also assign extension numbers automatically to BLF buttons using the information in the server’s resource list withouthaving to input information here.6.3.2 Settings using Configuration File ProgrammingFlexible keys can be configured by configuration file programming using a combination of 3 parameters:• Parameter 1 refers to either "FLEX_BUTTON_FACILITY_ACTx" or "DSS_BUTTON_FACILITY_ACTx".• Parameter 2 refers to either "FLEX_BUTTON_FACILITY_ARGx" or "DSS_BUTTON_FACILITY_ARGx".• Parameter 3 refers to either "FLEX_BUTTON_LABELx" or "DSS_BUTTON_LABELx".Details about parameters 1 and 2 are explained in the following table.Note• For parameter 2, value 1 and value 2 must be separated by a comma.Parameter 1 Parameter 2Value Value 1 Value 2 NoteX_PANASONIC_IPTEL_ONETOUCHPhone Number(Max. 32characters)Line Number(1–n)Line 1 is set when value 2 is "1", "0",or "None".X_PANASONIC_IPTEL_BLFPhone Number(Max. 32characters)Line Number(1–n)Line 1 is set when value 2 is "1", "0",or "None".X_PANASONIC_IPTEL_LINELine Number(1–n) - The default line is set when value 1 is"0" or "None".X_PANASONIC_IPTEL_ACDLine Number(1–n) - The default line is set when value 1 is"0" or "None".X_PANASONIC_IPTEL_WRAPUPLine Number(1–n) - The default line is set when value 1 is"0" or "None".X_PANASONIC_IPTEL_LINESTATUS - - -X_PANASONIC_IPTEL_FORWARDPhone Number(Max. 32characters)- -6.3.2 Settings using Configuration File Programming372 Administrator Guide Document Version: 2017-07
