4.2.3.1 VoIP StatusLine No.(1–n)*1Description Indicates the line number to which a phone number is assigned(reference only).Value Range Line 1–Line n*1 The number of lines available varies depending on the phone being used.Phone NumberDescription Indicates the currently assigned phone numbers (reference only).Note• The corresponding field is blank if a line has not yet beenleased or if the unit has not been configured.Value Range Max. 32 digitsVoIP StatusDescription Indicates the current VoIP status of each line (reference only).Value Range • Registered: The unit has been registered to the SIP server, and theline can be used.• Registering: The unit is being registered to the SIP server, and theline cannot be used.• Blank: The line has not been leased, the unit has not beenconfigured yet, or a SIP authentication failure has occurred.Note• Immediately after starting up the unit, the phone numbers ofthe lines will be displayed, but the status of the line may not bedisplayed because the unit is still being registered to the SIPserver. To display the status, wait about 30 to 60 seconds, andthen click [Refresh] to obtain updated status information.4.3 NetworkThis section provides detailed descriptions about all the settings classified under the [Network] tab.4.3 Network66 Administrator Guide Document Version: 2017-07
