Type UsageProduct configuration file Configure settings that are required for a particular model, such asthe default setting of the privacy mode. This configuration file isused by all the units that have the same model name.The same number of configuration files as models being used onthe network are stored on the provisioning server, and units withthe same model name download the corresponding configurationfile.Example of the configuration file’s URL:http://prov.example.com/Panasonic/Config{MODEL}.cfgNote• When a unit requests the configuration file, "{MODEL}" isreplaced by the model name of the unit.Standard configuration file Configure settings that are unique to each unit, such as the phonenumber, user ID, password, etc.The same number of configuration files as units are stored on theprovisioning server, and each unit downloads the correspondingstandard configuration file.Example of the configuration file’s URL:http://prov.example.com/Panasonic/Config{MAC}.cfgNote• When a unit requests the configuration file, "{MAC}" isreplaced by the MAC address of the unit.Depending on the situation, you can use all 3 types of configuration files, and can also use only a standardconfiguration file.The above example shows only one possible way to use configuration files. Depending on the requirementsof your phone system dealer/service provider, there are a number of ways to use configuration fileseffectively.Using 2 Types of Configuration FilesThe following table shows an example of using 2 types of configuration files: a master configuration file toconfigure settings common to all units, and product configuration files to configure settings common toparticular groups.Using Product Configuration Files According to the Position GroupsYou can use product configuration files for different groups or for multiple users within the same group.Department Name URL of Product Configuration FileSales http://prov.example.com/Panasonic/ConfigSales.cfgPlanning http://prov.example.com/Panasonic/ConfigPlanning.cfg2.2.4 Downloading Configuration FilesDownloading a Configuration File via the Web User InterfaceThe following procedure describes how to enable downloading a configuration file via the Web UserInterface to be used for programming the unit.2.2.4 Downloading Configuration FilesDocument Version: 2017-07 Administrator Guide 33
