Panasonic KX-HNB700 User Manual

Also see for HomeHawk KX-HNC710: Installation guide Installation guides User guide

Contents

R Feature availability may vary depending on the availability of third-party services. Panasonic cannot beheld responsible for the availability and functionality of third-party services.Linking with your Google HomeYou must do the following in order to link the access point with your Google Home.– Create a Panasonic ID for logging in to the Panasonic server ( “Creating a Panasonic ID”, Page 34)– Log in to the Panasonic server and configure your Google Home to link with the access point( “Logging in to the Panasonic server and linking with your Google Home”, Page 34)Note:R This feature requires third-party equipment and services.R Confirm the following before you begin.– Make sure your Google Home can connect to the Internet.– Make sure you have installed the Google Home app on your mobile device.Creating a Panasonic IDA Panasonic ID is required to log in to the Panasonic server.1 From the [HomeHawk] app home screen, tap ® [Settings].2 Tap [Google Home].3 Select the desired access point.R An agreement may be displayed. If displayed, tap [Accept] to proceed.4 Tap [Create].R A browser is opened. Follow the on-screen prompts to create a Panasonic ID.Logging in to the Panasonic server and linking with your Google HomeIf you have a Panasonic ID you can log in to the Panasonic server and then configure your Google Hometo link with the access point.1 From the [HomeHawk] app home screen, tap ® [Settings].2 Tap [Google Home].3 Select the desired access point.R An agreement may be displayed. If displayed, tap [Accept] to proceed.4 Enter your Panasonic ID and password and then tap [Login].5 Using your Google Home app, search for the “Panasonic HomeHawk” service. Enter your PanasonicID in the displayed screen and enable the access point.R For details about these settings, refer to the operating instructions and support informationprovided for your Google Home.Changing your Panasonic ID1 From the [HomeHawk] app home screen, tap ® [Settings].2 Tap [Google Home].3 Select the desired access point.4 Tap [Unlink from Google Home] ® [OK], and follow the steps in “Logging in to the Panasonicserver and linking with your Google Home”, Page 34 to log in using the new Panasonic ID.34Using the app