Disabling detections when leaving your houseYou can disable detections for when people leave your house.This is convenient when only want to detect people approaching your house and do not want to detectpeople leaving your house.1 From the [HomeHawk] app home screen, tap ® [Settings].2 Tap [Camera Settings] and select the desired camera.3 Tap [Detection].4 Slide the [Disable when leaving] switch to the desired position.– When turned on: People leaving your house will not be detected.– When turned off: People leaving your house will be detected.Note:R You can also change these settings by tapping displayed next to camera images in the livecamera image screen ( “Viewing the live camera image screen”, Page 44).Detection testYou can test which areas of the camera image can be detected while viewing live images from thecamera. This is useful when determining where to install cameras, and also which areas you shouldenable or disable detection for.1 From the [HomeHawk] app home screen, tap ® [Settings].2 Tap [Camera Settings] and select the desired camera.3 Tap [Detection] ® [Detection Test].IR SensorShows which IR sensors of the camera detected motion.Video MotionA live image of the selected camera is displayed with detection areas colored to show their detectionstatus.– Pink outlined areas: Areas where motion was detected.– Blue outlined areas: Areas where motion was not detected.– Grey areas with a red diagonal line: Areas where detection is disabled. (See “Detection area”,Page 53 for more information.)Note:R You can also change these settings by tapping displayed next to camera images in the livecamera image screen ( “Viewing the live camera image screen”, Page 44).Front door camera and outdoor camera settingsChanging the name of camerasYou can edit camera names.The camera name setting is used to identify cameras. This is useful when you have multiple cameras.54Using a front door camera and outdoor camera