HD cameras feature a built-in temperature sensor, which allows the camera to alert you when theambient temperature is too high or too low, and a sound sensor, which allows the camera to alert youwhen sound is detected.Viewing the HD camera listThe HD camera list contains a link to each HD camera that your mobile device can access.To view the camera list, tap [Indoor HD Camera] in the home screen.Note:R You can change the thumbnail image displayed for HD cameras in the camera list. See “Thumbnailimage”, Page 76.HD camera icons displayed in the camera listCamera is registered to this mobile deviceCamera list optionsWhile viewing the camera list, the following items are available in the options menu (see “Displaying theoptions menu”, Page 60). Note that the available options vary depending on system configuration andcurrent connection status– [Add HD Camera]Allows you to add an HD camera.– [Remove HD Camera]Allows you to deregister an HD camera from this mobile device.– [Remote Access Mode] (certain regions only)Determines the protocol used when viewing camera images while away from home. This setting is setto [UDP] by default and normally should not be changed. Select [TCP] if a black screen is displayedwhen you are trying to view camera images.Viewing live HD camera images1 From the [HomeHawk] app home screen, tap [Indoor HD Camera].2 Select the desired camera.3 If prompted, enter the camera’s password.R A live image from the selected camera is displayed in single-camera display mode.Important:R Some mobile devices may become hot when viewing HD camera images continuously for long periodsof time. If your mobile device becomes too hot, stop viewing HD camera images and wait for themobile device to cool down.Turning the camera audio on and offSlide the switch to the desired position while viewing live images from a single camera.: Camera audio will be heard: Camera audio will not be heard62Using an HD camera