4 Tap [Reset HD Camera].5 Select the desired feature.– [Reset All Settings]: Resets all camera settings, including wireless settings.– [Reset HD Camera Settings]: Resets all camera settings except wireless settings.– [Reset Wireless Settings]: Resets wireless settings only.6 Follow the on-screen instructions.7 If you selected [Reset HD Camera Settings]The procedure is complete.If you selected [Reset All Settings] or [Reset Wireless Settings]Wait for the camera’s LED indicator to light in green, then set up the camera again by following theinitial setup procedure (see “Setting up the HD camera”, Page 58).Using the camera’s reset buttonYou can use the camera’s reset button to reset the camera’s wireless settings. Use this procedure if youhave trouble setting up the camera.1 Plug in the camera.2 Using an object with a thin tip, press and hold the reset button on the back of the camera for about10 seconds, then release the button when the camera beeps.R The camera’s settings are reset.3 Wait for the camera’s LED to light in green.Note:R After resetting the camera, you cannot use the camera again until it is set up. You can set up thecamera again by following the initial setup procedure (see “Setting up the HD camera”, Page 58).System expansionRegistering other mobile devices to the HD cameraTo register a mobile device to the camera, use the procedure described in “Registering additional mobiledevices to the camera”, Page 59.82Using an HD camera