1 From the [HomeHawk] app home screen, tap ® [Settings].2 Tap [Camera Settings] and select the desired camera.3 Tap [Name].4 Enter the desired name.5 When finished, tap [OK].Note:R You can also change these settings by tapping displayed next to camera images in the livecamera image screen ( “Viewing the live camera image screen”, Page 44).Status LEDYou can determine whether the camera’s LED indicator lights or is disabled.1 From the [HomeHawk] app home screen, tap ® [Settings].2 Tap [Camera Settings] and select the desired camera.3 Tap [System].4 Slide the [Status LED] switch to the desired position.Note:R You can also change these settings by tapping displayed next to camera images in the livecamera image screen ( “Viewing the live camera image screen”, Page 44).Updating firmwareYou can use this feature to check for a newer version of the camera firmware (i.e., system software). If anewer version is found, you can update the firmware.Important:R Make sure to fully charge the camera before updating its firmware. The firmware may not be able to beupdated if the battery level is low.1 From the [HomeHawk] app home screen, tap ® [Settings].2 Tap [Camera Settings] and select the desired camera.3 Tap [System] ® [Firmware Update].R The camera will connect to the Internet and check for a newer version of its firmware.4 Follow the on-screen instructions.Note:R You can also change these settings by tapping displayed next to camera images in the livecamera image screen ( “Viewing the live camera image screen”, Page 44).Resetting camera settings1 From the [HomeHawk] app home screen, tap ® [Settings].2 Tap [Camera Settings] and select the desired camera.55Using a front door camera and outdoor camera