® 16.7 PBX Configuration—[8-7] ARS—Authorisation Code for TRGItemised Billing Code15An Itemised Billing code can be assigned for each extension and for each verification code.If a call is not made from an extension (e.g., DISA or TIE) and no verification code is used, the ItemisedBilling code assigned in the location 1 of the verification code will be used.® 12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 1—ARS Itemised Code® 12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Option 1—ARS Itemised Code® 14.3 PBX Configuration—[6-3] Feature—Verification Code— Itemised Billing Code for ARSConditionsCAUTIONThe software contained in the ARS feature to allow user access to the network must be upgraded torecognise newly established network area codes and exchange codes as they are placed into service.Failure to upgrade the on-premise PBXs or peripheral equipment to recognise the new codes as they areestablished will restrict the customer and users of the PBX from gaining access to the network and to thesecodes.KEEP THE SOFTWARE UP TO DATE WITH THE LATEST DATA.• Dialled Number on SMDRIt is possible to choose to print either the user-dialled number or the modified number on SMDR throughsystem programming. (® 2.22.1.1 Station Message Detail Recording (SMDR))® 19.1 PBX Configuration—[11-1] Maintenance—Main—SMDR Options— Option—ARS Dial• ARS Data Download/UploadIt is possible to download or upload the following ARS data to the PBX using PC programming:–2 ARS Leading Number Exception Table–3 ARS Leading Number Table–4 ARS Routing Plan Table® 6.6 Tool—Import® 6.7 Tool—ExportThis is useful when a carrier has changed the call charge, and the updated data can be used for multiplecustomers.• A TRS/Barring check is done before ARS is applied. (® 2.7.1 Toll Restriction (TRS)/Call Barring(Barring))PC Programming Manual References6.6 Tool—Import→ARS - Leading Digit→ARS - Except Code→ARS - Routing Plan6.7 Tool—Export10.3 PBX Configuration—[2-3] System—Timers & Counters—Dial / IRNA / Recall / Tone— Dial—ExtensionInter-digit10.9 PBX Configuration—[2-9] System—System Options—Option 3— Dial Tone—Dial Tone for ARS12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 1— ARSItemised Code12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Option 1— ARSItemised Code132 Feature Guide2.8.1 Automatic Route Selection (ARS)
