• Mailboxes specified as the recording destination become dedicated Automatic Two-way Recordingmailboxes. It is not possible to record messages to these mailboxes through other means, and subscriberscannot log in to them.• Forwarded calls and calls retrieved from being on hold will also be automatically recorded. However,conference calls will not be recorded.• A call between 2 extensions connected via QSIG (TIE) is treated as an external call (regardless of whetherKX-NSN002 [Activation Key for QSIG Network] is installed). To record these types of calls, trunk (external)calls must be selected as one of the types of calls to record.• Recording will automatically stop when the mailbox reaches its capacity. Delete older messages in orderto use this feature again.• If the enabled extension has a Two-way Record button assigned to it, the button will flash during recording.However, that button cannot be used to cancel this feature. The extension cannot cancel this featurethrough Communication Assistant (CA) either.• An extension whose conversation is being recorded cannot be the target of the following features:– Executive Busy Override (® 2.10.2 Executive Busy Override)– Call Monitor (® 2.10.3 Call Monitor)– Whisper OHCA (® 2.10.4.4 Whisper OHCA)• Automatic recording will not be performed when both the target extension and the other party are ISDNextensions.• Conversations recorded with this feature are backed up via System Backup/Restore (® 3.1.2.5 SystemBackup/Restore).PC Programming Manual References7.10 Utility—Automatic Two-way Recording8.3 Users—Automatic Two-way Recording12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—UM— Two-wayRecording12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—UM— Two-wayRecordingUser Manual ReferencesManager Operation3.2.1 User Programming— Automatic Two-way Recording for Manager3.2.1.5 Broadcasting MessagesDescriptionAllows the System Manager to deliver the same message to the mailboxes of all subscribers simultaneously.Broadcast Messages have priority over other regular or urgent messages during playback, but otherwise aretreated like regular messages. They are not treated as "Urgent" messages; if "Only Urgent Messages" isselected as the Notification Type in the Notification Schedule, the Message Waiting Notification is not activatedwhen a Broadcast Message is received.Conditions• This feature is only available for the System Manager.Feature Guide 2753.2.1 System Features
