2.1.1.6 Intercept RoutingDescriptionProvides automatic redirection of incoming trunk and intercom calls. There are three types of Intercept Routingas follows:Feature DescriptionIntercept Routing—No Answer(IRNA)If a called party does not answer a call within a preprogrammed timeperiod (IRNA Timer), the call is redirected to the preprogrammeddestination.Intercept Routing—Busy If a called party is already handling a call, new calls are handled asfollows:– The call is redirected to the preprogrammed InterceptRouting—Busy destination.– If an Intercept Routing—Busy destination is not enabled, thecaller will hear a busy tone. However, if the call is made throughan ELCOT/LCOT or T1 (LCOT/GCOT) card, the caller hears aringback tone.Intercept Routing—DND If a called party is in DND mode, the call is redirected to thepreprogrammed destination.Intercept destinations can be assigned to extension ports.® 12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—InterceptDestination— Intercept Destination—When called party does not answer—Day, Lunch, Break, Night® 12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—InterceptDestination— Intercept Destination—When called party does not answer—Day, Lunch, Break, NightWhen the original destination is: The Available Intercept Destination is:• Wired Extension (PT/SLT/SIP Extension/T1-OPX)• PS• Fax UnitThe destination assigned to the original extension.12.1.1 PBX Configuration—[4-1-1]Extension—Wired Extension—ExtensionSettings—Intercept Destination→ Intercept Destination—When called partydoes not answer—Day, Lunch, Break, Night→ Intercept Destination—When Called Party isBusy12.2.1 PBX Configuration—[4-2-1]Extension—Portable Station—ExtensionSettings—Intercept Destination→ Intercept Destination—When called partydoes not answer—Day, Lunch, Break, Night→ Intercept Destination—When Called Party isBusy34 Feature Guide2.1.1 Incoming Trunk Call Features
