Panasonic KX-NT400 Operating Instructions Manual

Also see for KX-NT400: Brochure & specs Brochure & specs Operating instructions Operating instructions User manual

Contents

Panasonic KX-NT400 Operating Instructions Manual Manual pdf 118 page image

• Maximum 15 charactersNote• Selecting a camera with the drop-down list onlyfills in the fields. Even if you change thecamera’s information, those changes will not bereflected in the contact’s settings. You mustupdate the contact’s settings separately.Page 3/3—Camera Information 2Camera HTTP Port NumberEnter the port number that the camera uses forHTTP communication.• Default value: 80• Value range: 1–65535Camera CodecSelect the codec that the sensor’s camera uses toencode video.• Select Motion JPEG or MPEG4.• Default value: Motion JPEGCamera RTSP Port Number (MPEG4 Only)Enter the port number that the camera uses forRTSP communication. This setting is onlynecessary if the camera uses the MPEG4 codec.• Default value: 554• Value range: 1–65535Note• Consult your administrator to obtain the correctvalues for the camera settings.Managing the PBX’sSystem Speed DialEntriesIf your extension has sufficient privileges, then you canmanage the system speed dial entries. Managingentries includes adding new entries, and editing anddeleting existing entries.System speed dial entries are stored on the PBX, andare accessible by other extension users. Any changesyou make affect all PBX users.To add a system speed dial number from yourlocal directory1. On the Contacts screen, make sure the localdirectory is displayed.2. Select the contact you want to add.3. Press .The Speed Dial Add window appears withinformation about the contact already entered in thefields.Note• The button for adding a system speed dialnumber does not appear for contacts thatare entries in the system speed diallingdirectory.4. Edit the fields as necessary.For details about the fields, see "Details for SystemSpeed Dialling Settings (Page 120)".5. Press OK.Note• Up to 1000 entries can be stored in the systemspeed dialling directory.• You cannot add doorphones or sensors to thesystem speed dialling directory.• You cannot add entries directly from an LDAPdirectory. To add an LDAP contact to thesystem speed dialling directory, first add thatcontact to your personal contacts. For detailsabout adding an LDAP contact to your personal118 Operating InstructionsContact Management