Usage tips• For details about the buttons and icons on the CallLog screen, see "Call Log Screen (Page 49)".• On the detailed information screen, the followingactions are also available:– Add to Directory: Add the information from thecall log to your personal directory. See "Addinga Contact from a Call Log (Page 113)".– Add to Speed Dial: Add the information fromthe call log to the system speed diallingdirectory. See "Managing the PBX’s SystemSpeed Dial Entries (Page 118)".– Recorded Picture: When you receive a callfrom a destination with an integrated camera, apicture is taken and stored in the call log. Pressthis button to view the picture.– Show Details: Display a screen with additionaldetails about the call, such as the time the callstarted and ended, and the duration.– : Delete the call log.Note• If you have new missed calls, displaying theMissed call log clears the Missed Call buttonfrom the HOME screen. See "HOME Screen(Page 30)".• It is recommended that you create a personalcontact for any doorphones/sensors that youwill receive calls from. Doing so ensures that theregistered name always appears in the call log.Redialling the Last Number YouDialled (Last Number Redial)Operation in Call List modeYou can redial the last number that you dialled. Bydefault, this operation redials both extension numbersand outside phone numbers.1. On the HOME screen, go off-hook, and then pressRedial.2. To end the call, go on-hook.Usage tips• You can change the behaviour of the Redial buttonso that it redials only the last outside number thatyou dialled. With this setting, the Redial button isunavailable while you are on-hook. For details, see"Display / Operation Settings (Page 121)".Operation in Line Buttons modeYou can redial the last outside phone number that youdialled.1. On the Calls screen, go off-hook, and then pressREDIAL.2. To end the call, go on-hook.Usage tips• Pressing the Redial button on your Bluetoothheadset redials the last outside phone number youdialled. To enable this feature, consult youradministrator.Note• Up to 32 digits can be stored and redialled.Operating Instructions 69Basic Feature Operation
