Page 2/3Login CodeEnter the login code for the camera.• Maximum 15 charactersPasswordEnter the password for the camera.• Maximum 15 charactersPage 3/3CodecSelect the codec that the camera uses to encodevideo.• Select Motion JPEG or MPEG4.• Default value: Motion JPEGCamera RTSP Port (MPEG4 Only)Enter the port number that the camera uses forRTSP communication. This setting is onlynecessary if the camera uses the MPEG4 codec.• Default value: 554• Value range: 1–65535IP Camera Selection ButtonsSettingsThe IP Camera Selection Buttons settings allow you toassign up to 4 cameras to the buttons that appear at thebottom of the Camera screen. These buttons let youaccess the assigned cameras with one touch.To assign cameras to the selection buttons1. Press the Options tab > User Options > IPCamera Selection Buttons.2. Assign cameras to the buttons as desired.See "Details for IP Camera Selection ButtonsSettings (Page 126)".3. Press OK.Usage tips• For details about the selection buttons screen, see"Selecting Cameras to View (Page 85)".• For details about the Camera screen, see "CameraScreen (Page 51)".Details for IP Camera SelectionButtons SettingsCamera Button 1–Camera Button 4Press the drop-down list for the correspondingbutton to select a camera. You can select fromcurrently registered cameras.Portal SettingsThe Portal settings allow you to set a list of up to 50intranet Web pages that you can access from thePortal screen. You can also specify one of the pagesas the homepage.To manage the intranet Web page list1. Press the Options tab > User Options > Portal.126 Operating InstructionsSettings and Customisation
