Programmable SettingsFor assistance, please call 1-800-211-PANA (7262). 39Handset interrupt toneThis tone lets you know when you receivea call while you are on an intercom call(page 31).“2” (default): The tone will sound 2 times.“On”: The tone will sound for as long as theline rings.“Off”: Turns this feature off.1 Press {MENU}.2 Scroll to “Ringer setting” bypressing {V} or {^}, then press {>}.3 Scroll to “Interrupt tone” bypressing {V} or {^}, then press {>}.4 Press {V} or {^} repeatedly to selectthe desired setting.5 Press {Save}, then press {OFF}.Handset Talking Caller IDYou can turn the Talking Caller ID feature(page 26) on or off for the handset. Thedefault setting is ON.1 Press {MENU}.2 Scroll to “Talking CallerID” bypressing {V} or {^}, then press {>}.3 Press {V} or {^} repeatedly to select“On” or “Off”.4 Press {Save}, then press {OFF}.Call optionsAuto talkWhen this feature is turned on, you cananswer a call by lifting the handset off thebase unit or charger without pressing{C}. The default setting is OFF.1 Press {MENU}.2 Scroll to “Initial setting” bypressing {V} or {^}, then press {>}.3 Scroll to “Auto talk” by pressing {V}or {^}, then press {>}.4 Press {V} or {^} repeatedly to selectthe desired setting.5 Press {Save}, then press {OFF}.Note:L If you subscribe to Caller ID service andwant to view the caller’s information onthe handset display after lifting up thehandset to answer a call, turn off thisfeature.Voice enhancerYou can turn the voice enhancer feature onor off. The default setting is OFF.1 Press {MENU}.2 Scroll to “Voice enhancer” bypressing {V} or {^}, then press {>}.3 Press {V} or {^} repeatedly to select“On” or “Off”.4 Press {Save}, then press {OFF}.L When turned on, “J” will bedisplayed.