Programming22Programmable settingsYou can customize the unit by programming the following features using the handset.To access the features, there are 2 methods.■ Scrolling through the display menus1 {MENU} (middle soft key)2 Press {V}, {^}, {4}, or {3} to select the desired main menu. s {OK}3 Press {V} or {^} to select the desired item from the next sub-menus. s {OK}4 Press {V} or {^} to select the desired setting. s {OK}L This step may vary depending on the feature being programmed.L To exit the operation, press {OFF}.■ Using the direct command code1 {MENU} (middle soft key) s Enter the desired code.Example: Press {MENU} (middle soft key) y1z1.2 Select the desired setting. s {OK}L This step may vary depending on the feature being programmed.L To exit the operation, press {OFF}.Note:L In the following table, < > indicates the default settings.L In the following table, + indicates the reference page number.L Display menu order and sub-menu may vary depending on your model.Display the menu tree and direct command code tableMain menu: j “Caller list”Main menu: s “Answering device”*1Operation Code +Viewing the caller list. #213 30Sub-menu 1 Sub-menu 2 Setting Code +Play new msg.(msg.: message)– – #323 33Play all msg. – – #324 34Erase all msg.*2 – – #325 34Greeting Record greeting*2 – #302 33Check greeting – #303 33Pre-recorded*2(Reset to pre-recordedgreeting)– #304 33TG80xxC(e).book Page 22 Friday, June 10, 2011 2:06 PM